Hasselblad Digital Camera CF User Manual

digital CaMERaS  
View Camera solutions  
With digital photography it has become easier to work the tilt/shift  
mechanism of a view camera and hereby achieve a special photo-  
graphic expression. the digital solutions however, are still heavy to  
bring into the field, and controls to place the wanted focus correctly  
are not optimal.  
New ground breaking developments on the H3d camera system  
allow for direct tilt/shift work using the new HtS1.5 tilt/shift  
adapter, and the new HVC view camera adapter kit allows for  
classic view camera work both un-tethered and with new levels of  
focus control.  
the CF/CF-MS/CFV digital back can also be mounted onto a view  
camera platform.  
View Camera Connectivity  
All Hasselblad digital camera products can work with view cameras.  
two options are available to physically attach the digital capture  
unit to the view camera. the first is known as a live Video adapter,  
as the only method of composing and focusing the image is done via  
the live Video controls in Phocus. the second is the Sliding adapter  
that allows use of a conventional ground glass screen for composition  
and the ability to then slide the back in place. these items are easily  
obtainable from third party suppliers.  
Both the H3d camera products and the CF range of digital backs have  
a sophisticated interface,and allow micro-processor controlled connec-  
tions to electronic shutters for full control capture mode (single-shot,  
multi-shot) and of aperture, shutter and exposure.  
the remaining digital products are triggered by a simple flash sync  
connection. a summary is outlined in the table below.  
the digital capture unit of the H3d and the 503CWd camera  
products can be removed and mounted on a view camera platform.  
Please refer to links at the end of the Datasheet.  
View Camera Connectivity  
Hasselblad Product  
Flash Sync  
Yes  
Flash Sync Used with Electronic Shutter*  
Electronic Shutter with Full Control  
H3d, H3dii, H3dii-MS  
CF, CF-MS  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
503CWd, CFV  
Yes  
*If using an electronic shutter via flash sync connections, please note it will NOT be possible to control shutter and aperture values from Phocus.  
 
digital CaMERaS  
View Camera solutions  
Flexibility with regards to landscape/portrait work, and choice of view-finder system.  
New HtS1.5 tilt/shift adapter solutions  
For its H3dii camera products Hasselblad also offers the simple  
HtS1.5 tilt/shift adapter solution, which enlarges the image circle  
and thereby provides for a light, portable, easy to use solution  
with a +/- 18mm shift (half image size) and +/-10 degrees of tilt.  
the adapter works with 4 lenses: HCd 28mm, HC35mm,  
HC50mm, and HC80mm.  
Illustration shows: H3DII-31 with the HTS1.5 adapter and the  
HCD 28mm lens. For details, please refer to separate datasheet.  
 
digital CaMERaS  
View Camera solutions  
CF-line digital back solutions for View Cameras  
general Connection Options Manual Flash Sync  
-
if you are used to focus and compose you images using the live video  
functionality, then you can mount the CF-line digital backs directly onto  
a view camera with H-camera or V-camera interface, using correspond-  
ing i-adapters on the CF digital back.  
a method is required to physically trigger the lens shutter and the  
digital back simultaneously. this can be done via a very simple flash  
sync connection or via a sophisticated electronic interface.  
Using a manual copal type lens, connection is made from the lens  
flash sync to the Sync in port on the digital unit. therefore when the  
exposure is triggered on the lens, the digital unit receives a signal to  
expose simultaneously. if flash lighting is required then connection is  
made from the Sync Out port on the digital unit to the flash equipment.  
This applies to all models.  
if you prefer to focus and compose using a ground glass with a loupe  
Hasselblad can recommend sliding adapters from linhof - available  
with interface for either the i-adapter for a H-camera or for a V-camera.  
the sliding adapter is available from linhof. a number of features  
including viewfinder, loupe, and ground glass are available.  
Flash Sync with Electronic Shutters  
Having connected the elements of the view camera solution,  
you simply choose your capture mode in Phocus.  
From now your controls when working tethered include:  
• exposure time  
the use of an electronic shutter with a flash sync connection may be  
more convenient as it prevents the user disturbing the lens to adjust  
exposure settings or allow easier access to make these adjustments.  
Please note that using an electronic shutter in this way requires an  
interface from the manufacturer to allow aperture selection, Shutter  
Speed and Capturing control.  
• aperture  
• capture single shot  
• capture multi shot (for CF-line multi shot products)  
• live video  
Full Control with Electronic Shutters  
two systems are supported by Hasselblad, from Schneider and Rollei.  
Both of these systems comprise of a battery or mains powered control  
unit, connection interface to the electronic shutter/lens, connection  
interface to a digital capture unit and flash synchronisation output.  
the control unit will allow the user to select aperture setting, shutter  
speed and trigger the exposure.  
the CF-line digital backs connect to the electronic shutters/lenses  
with separate connecting cables for the Schneider or for the Rollei  
electronic shutter. See item numbers at the end of this document.  
Working un-tethered the control of the electronic shutters takes place  
from the user interface on the digital capture unit.  
digital lenses  
Schneider and Rodenstock manufacture digital lenses, which can  
be supplied with the electronic shutter already fitted from Schneider  
or Rollei. this must be specified at ordering time. Equally, the view  
camera must have a front lens board that will accept the electronic  
shutter and lens. Rodenstock and Schneider can advise on the correct  
type of lens board for popular view cameras. Very wide angle lenses  
require recessed lens boards to get the lens physically close enough  
to the sensor in the digital capture unit. Please refer to links below for  
details on the lens program and availability.  
 
digital CaMERaS  
View Camera solutions  
The yellow flash symbol indicates where  
external flash equipment can be connected.  
Schneider supplies all cables and equip-  
ment.  
Schneider electronic shutter connections  
this system works with a simple cable connection and small control  
box. this has a single red button that is only used for opening and  
closing the shutter for focus and composition. all aperture settings,  
shutter speeds and triggering capture are made from Phocus.  
Rollei electronic shutter connections - Rollei lens Control S  
Unlike the Schneider system, the Rollei lens Control - S must be  
used in conjunction with a control panel. this will allow use of the  
Hasselblad CF digital back in a studio or portable situation, either  
working tethered to FlexColor or working untethered capturing to  
Compact Flash media or the image Bank.  
The yellow flash symbol indicates where  
external flash equipment can be connected.  
Rollei supplies all cables and equipment  
with the exception of the Rollei Expose  
Cable # 50300168.  
 
digital CaMERaS  
View Camera solutions  
Parts Summary and links  
itEM  
itEM NO.  
SUPPliER  
FlaSH SYNC CONNECtiON WitH MaNUal / COPal SHUttERS  
Camera Sync Cable from lens to digital capture unit  
Flash generator Sync Cable with protecting fuse  
50300122  
50300136  
Hasselblad  
Hasselblad  
FlaSH SYNC CONNECtiON WitH ElECtRONiC SHUttERS – SCHNEidER  
Power Supply / Charger  
1001656  
Schneider  
Schneider  
Hasselblad  
By user  
Shutter Control ES  
1001654  
50300122  
N/a  
Camera Sync Cable from lens to digital capture unit  
3 x NiMH 2200ma (aa size)  
FlaSH SYNC CONNECtiON WitH ElECtRONiC SHUttERS – ROllEi  
Power Supply  
30019  
Rollei  
Power interface  
30017  
Rollei  
Camera Sync Cable from lens to digital capture unit  
50300122  
Hasselblad  
FUll CONtROl WitH ElECtRONiC SHUttERS – SCHNEidER  
adapter Cable  
1005393  
1006021  
40292  
Schneider  
Schneider  
Schneider  
Hasselblad  
Hasselblad  
Expose Cable  
Power Supply  
H3d Expose Cable  
CF back Expose Cable  
50300177  
50300169  
FUll CONtROl WitH ElECtRONiC SHUttERS – ROllEi  
lens Control-S  
64872  
Rollei  
Power Supply  
30019  
Rollei  
Power interface  
30017  
Rollei  
Control Cable  
36705  
Rollei  
H3d Expose Cable  
50300178  
50300168  
Hasselblad  
Hasselblad  
CF back Expose Cable  
SlidiNg adaPtERS  
http://www.linhof.de/english/  
lindhof  
From here please download brochure for M679cs. Specs are on page 10 and back cover.  
lENS MaNUFaCtURERS  
http://www.linos.com/pages/no_cache/home/shop-optik/rodenstock-foto-objektive/  
digitale-fachfotografie/#sid13372  
Rodenstock/linos  
http://www.schneiderkreuznach.com/foto/dig/dig.htm  
Schneider Kreutznach  
 

Grizzly Drill G8593 User Manual
Haier Freezer HNCM035E User Manual
HANNspree Flat Panel Television ST03 15A1 User Manual
Hans Grohe Indoor Furnishings 1801001 User Manual
Heatiator Indoor Fireplace GC150 User Manual
HP Hewlett Packard Camcorder CW450 User Manual
HP Hewlett Packard Tablet E0H92AA#ABA User Manual
Humminbird Fish Finder GR16 User Manual
Humminbird Fish Finder Matrix 17 User Manual
Igloo Beverage Dispenser FRW152 User Manual